HC500LA Cold-Rolled Coil: Sourcing and Forming for Reinforced Bent Parts
Published
HC500LA is part of the high-strength low-alloy cold-rolled steel series. For reinforced cover frames with multiple bends, sourcing and forming should account for tooling capability, bend direction, and springback trials, with final angles and measurement datums provided. Jiangsu Gaozhen handles enquiries by grade, dimensions and processing requirements.
HC500LA: material and applications
HC500LA belongs to the high-strength low-alloy cold-rolled family and can be discussed against the design of a reinforced cover frame. Multiple bends require consideration of strength, forming space, tooling loads and springback, followed by final assembly clearances.
Provide finished and blank drawings and explain how the frame meets adjacent components. Establish bend radii, sequence and measurement datums from the drawing and process plan, then check individual angles and the completed outline on samples rather than inspecting one bend alone.
Material-category reference: https://industry.arcelormittal.com/catalogue/B20/EN
Bend Planning for Reinforced Cover Frames
Reinforced cover frames often involve multiple consecutive bends, and cumulative angles affect assembly clearance. Before incoming material, confirm tooling capability: press brake tonnage, die opening, and corner radius should match sheet thickness and strength. During trials, measure angles pass by pass, record springback, and check whether cumulative error causes assembly interference. Purchasing should provide final angles and measurement datums so trials and acceptance use the same reference. If switching material at the same thickness, evaluate together with equipment, tooling, and finished-part requirements; do not simply reuse existing parameters.
Sourcing Details and Coordination Rationale
Stock dimensions can be derived from the blank drawing, while acceptance angles should refer to the finished drawing. State gauge, tolerance, blank dimensions and final measurement datums separately, and have the fabricator confirm the bend sequence. Include assembly clearances where the cover frame meets other parts.
During trials, record each bend angle and then measure the completed shape. For a change to HC500LA, retain the earlier process record for comparison and review equipment, tooling and material compatibility. Relate production material identification to the sample records so that later angle deviations can be investigated.
Can Same-Thickness Material Be Directly Substituted?
Not directly. Same thickness does not mean identical bending behavior; evaluate equipment and tooling capability together with finished-part requirements. Confirm press brake tonnage, die setup, and target angles, then run a small trial, measuring springback and cumulative angles pass by pass and checking assembly clearance. Purchasing should provide final angles and measurement datums, and decide on bulk substitution only after the trial passes.
HC500LA dimensions and supply enquiry
The Gaozhen HC500LA product page lists these catalogue dimensions: Thickness range: 0.2-6.0 mm; Width range: 1000/1250/1500 mm. These values support specification discussions; confirm the required combination of gauge, width and condition for the material.
For this cold-rolled component, discuss cut-to-length sheets or slit coil against the developed blank. Include the final drawing and scope for cutting, CNC shearing or bending.
Product details: View related product details
Products and processing enquiries at Jiangsu Gaozhen
Jiangsu Gaozhen Trading Co., Ltd. handles trading and processing coordination for steel sheet, coil and related metal materials. Customers can find a grade and discuss drawings, service conditions and manufacturing requirements.
The product range includes cold-rolled, hot-rolled, galvanized and other coated, pickled, spring-steel, carbon-steel and stainless sheet or coil, plus zinc-titanium / zinc-copper-titanium and copper-titanium alloys. For a mixed-material project, list HC500LA and other grades as separate items with their own specifications.
Product catalogue: https://gaozhenmetal.com/en/products/
Enquire about HC500LA at Jiangsu Gaozhen
For a HC500LA enquiry, prepare the following information so the business team can review supply and processing against the actual component.
Material and dimensions: HC500LA, drawing revision or specified requirements, gauge and tolerance, width, and cut length for sheets.
Project conditions: visible faces and surface requirements, stamping or bending operations, critical corners and drawing revision.
Purchase plan: trial or batch requirement, quantity, delivery destination and requested timing.
Choose “Send enquiry” in the floating assistant, complete product, dimensions, quantity and contact details, confirm consent and submit. A receipt reference confirms that the form has been saved in Gaozhen’s website inbox. A chat message alone is not a submitted enquiry form.
Alternatively, contact Wang Dawei at +86 13861182855 or dawei5373@126.com. Mention this HC500LA article to help identify the product under discussion.
The business team confirms pricing, available specifications, stock and delivery against the enquiry.