DX54D+AZ Aluzinc Steel Coil: Forming and Coating Requirements for Equipment Guards
Published
DX54D+AZ is an Aluzinc-coated steel coil listed in the catalog. For equipment guards with curved surfaces and local drawing, the forming route and coating condition should be defined together. Procurement should organize requirements around part material, processing sequence, and appearance criteria. Jiangsu Gaozhen handles enquiries by grade, dimensions and processing requirements.
DX54D+AZ: material and applications
DX54D+AZ is an Aluzinc-coated steel coil listed in the catalog, with a forming-grade substrate and an aluminum-zinc coating. Its selection value lies in combining formability with coating protection, making it suitable for equipment guards with curved surfaces, local drawing, and subsequent assembly. At procurement, specify the substrate grade, coating designation, and surface treatment suffix, and retain the full callout on bilingual drawings. This grade is not automatically equivalent to other coated coils, and +Z test results cannot be directly applied to +AZ. The forming route should be evaluated together with the material condition, and samples should confirm the correspondence between substrate, coating, surface treatment, and mass production.
Guard Part Material and Processing Sequence
Blank dimensions for a curved cover should account for drawing, trimming and mounting edges together. Mark curved transitions, local features and connection holes on the drawing, then have the fabricator plan blanking and forming. Measure both the outline and the transition between the curved face and mounting edges.
Inspect the aluminium-zinc surface after forming and handling. Compare visible scuffs, coating condition around bends and changes near trimmed edges with reference samples. Where painting or bonding follows, validate surface preparation on an actual formed part rather than relying only on an unworked flat sheet.
Procurement Details and Rationale
When purchasing DX54D+AZ coils, state the substrate grade, coating designation, surface treatment, and suffix in the order, and keep bilingual drawings complete. The rationale is that the coating condition of formed guards depends on substrate, coating, and surface treatment together; missing information can cause samples and mass production to diverge. When requesting samples, specify the substrate, coating, and surface treatment represented, and keep records linking them to production coils. For guards with curved surfaces and local drawing, samples can be required to show coating appearance after drawing and trimming, but specific die parameters need not be prescribed.
FAQ: Can +Z Test Results Be Used for +AZ?
No. +Z and +AZ have different coatings, so test results cannot be directly applied. To judge the forming and coating condition of DX54D+AZ, use +AZ samples and confirm that substrate, coating, and surface treatment match mass production.
DX54D+AZ dimensions and supply enquiry
The Gaozhen DX54D+AZ product page lists these catalogue dimensions: Thickness range: 0.25-3.0 mm; Width range: 1000/1250/1500 mm. These values support specification discussions; confirm the required combination of gauge, width and condition for the material.
Discuss substrate, coating, surface condition and blank dimensions separately, then coordinate stock with cut-to-length, slitting or forming needs.
Product details: View related product details
Products and processing enquiries at Jiangsu Gaozhen
Jiangsu Gaozhen Trading Co., Ltd. handles trading and processing coordination for steel sheet, coil and related metal materials. Customers can find a grade and discuss drawings, service conditions and manufacturing requirements.
The product range includes cold-rolled, hot-rolled, galvanized and other coated, pickled, spring-steel, carbon-steel and stainless sheet or coil, plus zinc-titanium / zinc-copper-titanium and copper-titanium alloys. For a mixed-material project, list DX54D+AZ and other grades as separate items with their own specifications.
Product catalogue: https://gaozhenmetal.com/en/products/
Enquire about DX54D+AZ at Jiangsu Gaozhen
For a DX54D+AZ enquiry, prepare the following information so the business team can review supply and processing against the actual component.
Material and dimensions: DX54D+AZ, drawing revision or specified requirements, gauge and tolerance, width, and cut length for sheets.
Project conditions: full substrate designation and coating suffix, coating and surface requirements, forming and subsequent finishing.
Purchase plan: trial or batch requirement, quantity, delivery destination and requested timing.
Choose “Send enquiry” in the floating assistant, complete product, dimensions, quantity and contact details, confirm consent and submit. A receipt reference confirms that the form has been saved in Gaozhen’s website inbox. A chat message alone is not a submitted enquiry form.
Alternatively, contact Wang Dawei at +86 13861182855 or dawei5373@126.com. Mention this DX54D+AZ article to help identify the product under discussion.
The business team confirms pricing, available specifications, stock and delivery against the enquiry.