50CrV4 Spring Steel Strip: Blank Condition and Delivery State for Shaped Spring Clips
Published
50CrV4 cold-rolled spring strip can serve as stock for shaped elastic parts. Define delivery condition, forming route and later-treatment responsibilities so material requirements correspond to the actual component. Jiangsu Gaozhen handles enquiries by grade, dimensions and processing requirements.
50CrV4: material and applications
50CrV4 is listed in Gaozhen’s cold-rolled spring-steel catalogue and can be enquired about as stock for shaped elastic strips. Grade, delivery condition and final working behaviour are different parts of the specification. The condition for blanking, forming stage and any subsequent heat treatment depend on the manufacturing route.
Provide blank and finished drawings showing working travel, contact locations and dimensions before confirming the incoming condition. Keep 50CrV4, 51CrV4 and 50CrVA as separate complete designations; any proposed change should be assessed against the drawing and process requirements.
Processing Route for Shaped Spring Clips
A common route for shaped spring clips is to cut or punch blanks first, then form and post-treat according to the drawing. Purchasing should organize around blank condition, edge quality and downstream allowances: burrs and micro-cracks at blank edges can affect later forming and should be checked against die clearance and tool edge condition; hole positions and diameters affect assembly and stress distribution and need confirmation against the drawing; downstream allowances include forming allowance and dimensional change after heat treatment and should be reflected in blank dimensions. Raw material is not the finished clip. If blanks go directly to forming without scheduled heat treatment, elastic properties may not meet the drawing, so this division must be clear in the order.
Order Details Buyers Should Settle
Writing the drawing grade, delivery condition and division of post-processing into the purchasing documents before ordering is a direct way to avoid mismatch between blank and finished-part requirements. Settle specifically: whether the material condition is annealed or another defined state; whether blank dimensions and downstream allowances are marked on the drawing; whether edge quality and punching requirements can be inspected; and whether heat treatment is by supplier or buyer, with the corresponding acceptance points. With these details stated, quotes and lead times become comparable and disputes over condition interpretation after delivery are reduced.
Can an Order Be Placed with Only 'Spring Steel'?
Not directly. The drawing grade, delivery condition and division of post-processing must be defined: whether the grade is 50CrV4 or another listed grade, whether the condition is annealed or another agreed state, and who handles heat treatment and forming. If any of the three is missing, the supplier cannot judge blank requirements and acceptance points, and quotes lack a comparable basis.
50CrV4 dimensions and supply enquiry
The Gaozhen 50CrV4 product page lists these catalogue dimensions: Thickness range: 0.2-6.0 mm; Width range: 8-350 mm. These values support specification discussions; confirm the required combination of gauge, width and condition for the material.
For spring strip, discuss the grade, delivery condition, width and process route. Identify whether the order concerns raw stock or processed blanks to define dimensions and delivery scope.
Product details: View related product details
Products and processing enquiries at Jiangsu Gaozhen
Jiangsu Gaozhen Trading Co., Ltd. handles trading and processing coordination for steel sheet, coil and related metal materials. Customers can find a grade and discuss drawings, service conditions and manufacturing requirements.
The product range includes cold-rolled, hot-rolled, galvanized and other coated, pickled, spring-steel, carbon-steel and stainless sheet or coil, plus zinc-titanium / zinc-copper-titanium and copper-titanium alloys. For a mixed-material project, list 50CrV4 and other grades as separate items with their own specifications.
Product catalogue: https://gaozhenmetal.com/en/products/
Enquire about 50CrV4 at Jiangsu Gaozhen
For a 50CrV4 enquiry, prepare the following information so the business team can review supply and processing against the actual component.
Material and dimensions: 50CrV4, drawing revision or specified requirements, gauge and tolerance, width, and cut length for sheets.
Project conditions: strip delivery condition, edges and feed requirements, later treatment and component acceptance.
Purchase plan: trial or batch requirement, quantity, delivery destination and requested timing.
Choose “Send enquiry” in the floating assistant, complete product, dimensions, quantity and contact details, confirm consent and submit. A receipt reference confirms that the form has been saved in Gaozhen’s website inbox. A chat message alone is not a submitted enquiry form.
Alternatively, contact Wang Dawei at +86 13861182855 or dawei5373@126.com. Mention this 50CrV4 article to help identify the product under discussion.
The business team confirms pricing, available specifications, stock and delivery against the enquiry.